INFORMATION - DESCRIPTION
Pegs are usually mounted on one side, on the wheel axle. Some pegs allow mounting on both sides; if they do, you will find that in the specification below. To install a peg it is necessary to replace the wheel axle with a longer one; determine the new axle length by measuring the length of the existing axle and adding the extension value according to the specification below. Some peg kits already include axles and adjustment washers (spacers to offset the peg), which can be used, but their length may not match your scooter and the axle may need to be purchased separately. Also pay attention to the shape of the deck/fork and the shape of the peg seat; some pegs have a wider taper at the start of the seat and may not fit into certain forks/decks, in which case it is necessary to use spacers to offset or a different peg shape. If you are unsure, contact our support or service.
Peg specifications:
Required axle extension: 12 mm
Peg outer diameter: 32 mm
Peg inner diameter: 25 mm
Peg length: 42 mm
For axle diameter: 8 mm (standard)
Use pegs opposite each other (two pegs per wheel): Yes
Material: Aluminium
Peg weight: 31 g
Quantity: 1 pc without axle
Accessories:
Axles: https://www.scootering.cz/osy-kolecek-pro-freestyle-kolobezky/