Peg KUBARS ALU Joint | RED | 30x47mm | 1 pc

INFORMATION - DESCRIPTION

The peg is usually mounted on one side, on the axle of the wheel. Some pegs allow mounting on both sides; if this is permitted, you will find it in the specifications below. To mount the peg, it is necessary to replace the wheel axle with a longer one; you can find the new axle length by measuring the length of the existing axle and adding the extension value according to the specification provided below. Some peg sets already include axles and spacer washers (spacers to distance the peg), which can be used, but their length may not match your scooter, and the axle may need to be purchased separately. Furthermore, pay attention to the shape of the deck/fork and the shape of the peg's seat, as some pegs have a wider entrance from the start of the seat and may not fit into certain forks/decks, requiring the use of spacers for distancing or a different shape of peg. If you are unsure, please contact our support or service.

Peg Specifications:

Required axle extension: 20 mm
Peg diameter: 30 mm
Peg length: 47 mm
For axle diameter: 8 mm (standard)
Use of pegs opposite each other (two pegs on the wheel): yes
Screw diameter: 8 mm
Material: Aluminum
Peg weight: 33 g

Package Contents:

1 pcs Peg 47 mm

 

Accessories:

Axles: https://www.scootering.cz/osy-kolecek-pro-freestyle-kolobezky/